TB - Series Thermosetting Plastic Injection Molding Machine Specifications -Hwa Chin Machinery Factory

Specifications:

		MODELS	TB-125	TB-160	TB-210
SYSTEM	ITEMS	Clamping Force (Ton)	125	160	210
Injection	Screw Diameter	mm	36	42	48
	Pressure (Double cylinder)	kg/cm²	1615	1440	1460
	Theoretical Shot Volume	cm²	180	276	361
	Shot Weight	g	214	328	430
	Shot Weight	oz	7.5	11.6	15.1
	Injection Rate (Double cylinder)	cm³/sec	122	180	265
	Plasticizing Capacity	kg/hr	56	64	72
	Screw Rotation	rpm	0~282	0~279	0~249
Clamping	Clamping Stroke	mm	440	475	525
	Space Between Tie Bar (H x V)	mm	400x400	450x450	500x500
	Plate Dimension	mm	580x580	660x660	735x735
	Range of Mold Height	mm	55~355	55~405	75~465
	Ejection Stroke	mm	110	130	150
Other	Electrical Motor Power	HP	20	25	30
Other	Pump Pressure (Max.)	kg/cm²	140	140	140
Packing	Machine Dimension (L x W x H)	m	4.0x1.2x1.6	4.5x1.2x1.8	4.9x1.4x1.9
	Net Weight	ton	4.2	5.3	6.8
	Packing Dimension	m	4.2x1.4x1.8	4.7x1.4x2.0	5.1x1.6x2.1
	Gross Weight	ton	48	6	75
	Packing Dimension (clamping)	m
	Gross Weight (clamping)	ton
	Packing Dimension (injection)	m
	Gross Weight (injection)	ton

		MODELS	TB-250	TB-300	TB-350
SYSTEM	ITEMS	Clamping Force (Ton)	250	300	350
Injection	Screw Diameter	mm	55	60	65
	Pressure (Double cylinder)	kg/cm²	1481	1360	1590
	Theoretical Shot Volume	cm²	558	734	994
	Shot Weight	g	664	877	1183
	Shot Weight	oz	23.4	31	41.8
	Injection Rate (Double cylinder)	cm³/sec	272	410	353
	Plasticizing Capacity	kg/hr	97	122	146
	Screw Rotation	rpm	0~216	0~201	0~193
Clamping	Clamping Stroke	mm	580	630	685
	Space Between Tie Bar (H x V)	mm	550x550	600x600	650x650
	Plate Dimension	mm	810x810	930x930	1010x1010
	Range of Mold Height	mm	95~555	115~605	135~655
	Ejection Stroke	mm	150	180	180
Other	Electrical Motor Power	HP	40	50	50
Other	Pump Pressure (Max.)	kg/cm²	140	140	140
Packing	Machine Dimension (L x W x H)	m	5.4x1.5x2.0	6.1x1.6x2.0	6.4x1.7x2.1
	Net Weight	ton	8.5	10.5	12.5
	Packing Dimension	m	5.6x1.7x2.2	6.3x1.8x2.2	6.6x1.9x2.3
	Gross Weight	ton	10	12	14
	Packing Dimension (clamping)	m
	Gross Weight (clamping)	ton
	Packing Dimension (injection)	m
	Gross Weight (injection)	ton

		MODELS	TB-400	TB-450	TB-600
SYSTEM	ITEMS	Clamping Force (Ton)	400	450	600
Injection	Screw Diameter	mm	70	75	80
	Pressure (Double cylinder)	kg/cm²	1485	1588	1680
	Theoretical Shot Volume	cm²	1307	1767	2210
	Shot Weight	g	1555	2100	2630
	Shot Weight	oz	55	74.2	93
	Injection Rate (Double cylinder)	cm³/sec	450	421	461
	Plasticizing Capacity	kg/hr	206	227	274
	Screw Rotation	rpm	0~212	0~118	0~119
Clamping	Clamping Stroke	mm	750	880	950
	Space Between Tie Bar (H x V)	mm	700x700	780x780	880x880
	Plate Dimension	mm	1090x1090	1170x1170	1300x1300
	Range of Mold Height	mm	140~690	190~770	215~840
	Ejection Stroke	mm	200	240	280
Other	Electrical Motor Power	HP	60	60	75
Other	Pump Pressure (Max.)	kg/cm²	140	140	140
Packing	Machine Dimension (L x W x H)	m	7.0x1.8x2.1	7.8x1.9x2.1	8.8x2.1x2.2
	Net Weight	ton	16	23	30
	Packing Dimension	m	7.2x1.6x2.3	8.0x2.1x2.3	9.0x2.3x2.4
	Gross Weight	ton	18	25	33
	Packing Dimension (clamping)	m
	Gross Weight (clamping)	ton
	Packing Dimension (injection)	m
	Gross Weight (injection)	ton

Shot weight for bakelite. (Cross section area of screw x Injection stroke) x (Specific gravity) x (Injection efficiency.) Specification subject to change without notice on this catalog.
Standard Equipment	Attached Parts	Option Equipment
Automatic mold-adjusting device 5point vibration hydraulic ejector Core puller Multistage injection device Double side safely doors Electric current leakage protector Air control switch Vibration absorbing base	Tool box..................................1ea. "L" shape wrench....................1set. 14mm"L"shape wrench..........1ea. 23 x 26double ended wrench....1ea. Mold fixing irons......8sets or more Funnel and observer..................1set. Hydraulic ejecting rod................5pcs. Mold hoist device.....................1set. (For models smaller the TB-250)	Daphne themic oil temperature controller Digital or timing mold screw fit device